1·By adopting VB language and using a dynamic-link data base, designed was a thermodynamic calculation program for low-parameter single-cylinder steam turbines.
采用VB语言，通过动态链接库的调用，编制了低参数单缸汽轮机热力计算程序。
2·The steam was condensed rapidly by injecting cold water into the cylinder.
由于汽缸中注入了冷水，蒸汽迅速凝结了。
—— 《牛津词典》
3·The final step came when steam was introduced into the cylinder to drive the piston backward as well as forward, thereby increasing the speed of the engine and cutting its fuel consumption.
最后一步是将蒸汽引入气缸，使得活塞前后推动，从而提高了发动机的速度，降低了燃料消耗。
4·Once the cylinder had been filled with steam it was cooled directly by the application of cold water.
蒸汽充溢汽缸后，它会因为冷水的温度而直接冷却。
5·Filling the cylinder with steam pushes the piston out.
填充汽缸的蒸汽将活塞推出。
6·The core of a steam engine is a cylinder that is sealed at one end and has a moving piston at the other.
蒸汽机的核心是汽缸。它一端密封，另一端有个可以移动的活塞。
7·The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.
汽轮机快速冷却技术是在汽轮机组停运后，向汽轮机内部通以适量的较低温度的冷却介质，进行强迫对流换热，加快汽缸和转子温降速度的过程。
8·The pressure cylinder reservoir is filled with steam and gas cylinder increased.
而筒内压力又是随着充入储汽筒的蒸汽量而增大的。
9·Large size parts generally refer to those parts with more than one meter long in each dimension, such as low-pressure cylinder of steam turbine, wing panel of plane and so on.
大型零件通常是指那些在各个维度的尺寸超过一米的零件，比如蒸汽轮机的低压缸体，飞机的机翼壁板以及一些专用零件。
10·From 1993, the reconstruction of low pressure cylinder sealing began to conduct. The floating ring seal are changed into steam jamming seal. The applied effect is good.
1993年开始实施低压缸密封改造，将浮环密封改造成蒸汽阻塞密封，使用效果良好。